Group Title: Historic St. Augustine: Equipment and Warranties - Government House Auditorium
Title: 99 Series Exit Device
ALL VOLUMES CITATION MAP IT! THUMBNAILS PAGE IMAGE ZOOMABLE
Full Citation
STANDARD VIEW MARC VIEW
Permanent Link: http://ufdc.ufl.edu/UF00095489/00001
 Material Information
Title: 99 Series Exit Device Von Duprin, Part of worldwide Ingersoll-Rand
Series Title: Historic St. Augustine: Equipment and Warranties - Government House Auditorium
Physical Description: Brochure/pamphlet
Language: English
Physical Location:
Box: 8
Divider: Government House Maintenance
Folder: Equipment and Warranties - Government House Auditorium
 Subjects
Subject: Saint Augustine (Fla.)
48 King Street (Saint Augustine, Fla.)
Government House (Saint Augustine, Fla.)
Spatial Coverage: North America -- United States of America -- Florida -- Saint Johns -- Saint Augustine -- 48 King Street
Coordinates: 29.892465 x -81.313142
 Record Information
Bibliographic ID: UF00095489
Volume ID: VID00001
Source Institution: University of Florida
Holding Location: University of Florida
Rights Management: All rights reserved by the source institution and holding location.

Full Text

Series
EXIT DEVICE


VON DUPRIN
Part of worldwide Ingersoll-Rand


0


















Proper selection and application of exit
hardware, in addition to safety, are
major concerns to all responsible
manufacturers. Exit devices are a
critical part of a door opening or
access system, and will provide safe
and reliable service when properly
applied and maintained. It is the policy
of Von Duprin, Inc., to design and
manufacture exit devices to a high
standard of quality and reliability in
accordance with accepted U.S.
domestic and international standards.
All 99 series exit devices are UL listed
for Accident Hazard or Fire Exit
Hardware, and are tested in
accordance to ANSI A156.3, 1984,
Grade I.
It is intended that the information
included in this publication, when
properly used, will provide clear and
reliable guidelines to the proper
general selection and application.
However, the scope of the information
is necessarily limited.
Unusual operating conditions and
environments, and other external
influence can affect the proper
application of the products
represented. Modifications of these
products will also affect UL listings. It is
recommended that whenever an
unusual application condition exists, or
when any modification of a product is
considered, that our engineers review
the application.
Von Duprin, Inc. application
engineering services are available to
help ensure proper selection or to
review any areas where users of Von
Duprin products may have questions.

Von Duprin, Inc.
2720 Tobey Drive
RO. Box 6023
Indianapolis, Indiana 46206
(317) 897-9944












* Index






Exit Hardware
99 Rim device .................. 4-5
9927 Surface mounted vertical
rod device.................... 8-9
9947 Concealed vertical
rod device.................. 10-11
9975 Mortise lock device ......... 6-7
Fire Exit Hardware
99-F Rim device .............. 12-13
9927-F Surface mounted vertical
rod device.................. 16-17
9947-F Concealed vertical
rod device.................. 18-19
9975-F Mortise lock device ..... 14-15
Optional Device Features
99-2 Double cylinder.............. 24
CD99 Cylinder dogging ........... 24
EL99 Electric latch retraction ...... 22
* E9975 Electric mortise lock ........ 22
SS99 Signal switch............... 22
Accessories
99ALK Alarm kit ................. 23
99CDK Cylinder dogging kit ....... 24
99HDK Hex key dogging kit ....... 24
EPT-218 Electric power transfer.... 23
MPB840 Mini-power booster....... 23
330 Dummy push bar............. 24
Cylinders ....................... 24
Glass bead kit ................... 24
Optional levers .................. 24
Additional Information
ANSI grade, type & function ....... 21
Electronic applications ........ ... 27
Finishes ........................ 21
Fire label ratings/applications ...... 21
Handing ........................ 21
Nomenclature ................... 25
Popular double door applications... 26
Strike application/minimum stile .... 20










Rim Device


1/

I I


99 rim device for all types of single
doors and double doors with mullion,
UL listed for accident hazard
installations. Covers stock hollow
metal doors with 86 or 161 cutouts.


Features:
* Nonhanded
* Field sizeable
S/4" throw, latch bolt
* Latch bolt deadlocking
* Six popular finishes
* Hex key dogging


Dimensions
Touchbar height to 3913e"
finished floor at center
Touchbar projection-
neutral 313V6"
depressed 31/16"
Center case 8" x 21/4" x 23/4"
Device length-Short 3' 2'6" to 3'
door size
Long 4' 3'1" to 4'
door size


Strike
Device is furnished with standard
299 Strike in dull black finish
(optional finishes are available). For
strike applications, dimensions and
minimum door stile information refer
to chart 1, page 20.
Device Options
99-2 Double cylinder, page 24
CD99 Cylinder dogging, page 24
EL99 Electric latch retraction, page 22
SS99 Signal switch, page 22
330 Dummy push bar, page 24
To order, specify:
1. Product description number from
opposite page.
2. Size 3' (for door sizes 2'6" to 3') or
4' (for door sizes 3'1" to 4').
3. Door thickness if other than
standard 13".


Finish, see chart 2, page 21.
Handing, LHR or RHR. Required
on 99-2, "SS" or "L" function, only.
See chart 3, page 21.


e











Standard Trims Key retracts Key locks Pull when Exit only Key retracts Key locks lever
latch bolt thumbpiece dogged latch bolt
(Pull required)










Product Description 99NL 99TP2 99DT 99E0 x 990E03 99NL-OP1 99L*24*5

Trim Description 990NL-R 990TP-R 990DT 990E0 992L-R

Escutcheon Plate Size 3" x 143/16" x2" 3" x 14/16" x 3/32" 3" x 143/16" X 3/32" 3" x 143/16" 3/2" 2%" x 10%" x 3/4"

Grip Mounting Center 51/2" 51/2" 51/2" 41/2

Projection 2" 2" 2" 2%"

ANSI Function 03 05 02 01 03 08

Cylinder Type Rim Rim Rim Rim

Sex Bolt Requirements #425 2 2 2 2 6 2


Optional Trims Key retracts Key locks Pull when Key retracts Key locks Pull when
latch bolt thumbpiece dogged latch bolt thumbpiece dogged











Product Description 99NL x 696NL 99TP x 696TP2 99DT x 696DT 99NL x 697NL 99TP x 697TP2 99DT x 697DT

Trim Description 696NL-R 696TP-R 696DT 697NL-R 697TP-R 697DT

Escutcheon Plate Size 15/8"x131/2"x36" 1%"x 131/2"xM6" 1%"x131/2"x316" 1%"x131/2"x3/16" 1%"x131/2"x316" 1%"x131/2"x3/16"

Grip Mounting Center 51/2" 51/2" 51/2" 51/2" 51/2" 51/2"

Projection 2" 2" 2" 3" 3" 3"

ANSI Function 03 05 02 03 05 02

Cylinder Type Rim Rim Rim Rim -

Sex Bolt Requirements #425 2 2 2 2 2 2

'Specify WD (wood door) or MD (metal door). 3Available without escutcheon plate, order 4Matching dummy trim available, order 992LDT trim.
'If no cylinder operation is required, specify "BE" 99EO (six sex bolts are required when 5Night latch function available, order 992L-R-rigid trim.
blank escutcheon; example, 99TP-BE. applicable).
5











Mortise Lock Device


9975 mortise lock devices for all
types of single or double doors, UL
listed for accident hazard installations.
Fits stock hollow metal doors with 86
cutout and door stiles as narrow as
43/4".

The 7500 Mortise lock is equipped with
a 3/4" anti-friction latch bolt which is
field reversible without removing the
lock from the door. It has a
nonhanded auxiliary bolt for
deadlocking, and a faceplate which
has an adjustable bevel. Field
selection of functions are furnished
standard. TP, K, or L function may be
field selected by removing a set screw.
Electric locking and unlocking, and
signal switch options are available,
refer to page 22.


Features:
* Nonhanded
* Full reversible mortise lock
* Field sizeable
* 3/4" throw, anti-friction latch bolt
* Latch bolt deadlocking
* Six popular finishes
* Hex key dogging
Dimensions
Touchbar height to 39%"
finished floor at center
Latch bolt height to 40%3/32"
finished floor at center
Touchbar projection-
neutral 313.6"
depressed 31/16"
Center case 8" x 21/4" x 2%"
Device length-Short 3' 2'6" to 3'
door size
Long 4' 3'1" to 4'
door size
Lock case 45/s"x53/4"x 11 e"
Faceplate 11/4"x8"x7/32"
Cylinder backset 23/4"

Strike
Device is furnished with standard
575 strike in dull black finish,
optional finishes are available.
Specify when optional strike is


required. For strike dimensions refer
to page 20.
575 For use on 13/4" or 2%" single
doors and 21/4" double doors
with coordinator.
575-2 For use on 1%" double doors
with coordinator.
576 Open back strike for 13/4%"
double doors without
coordinator.
576B Open back strike for 2%"
double doors without
coordinator.
Device Options
CD9975 Cylinder dogging, page 24
EL9975 Electric latch retraction,
page 22
SS9975 Signal switch, page 22
E9975 Electric mortise lock, page 22
330 Dummy push bar, page 23
To order, specify:
1. Product description number from
opposite page.
2. Size 3' (for door sizes 2'6" to 3') or
4' (for door sizes 3'1" to 4').
3. Door thickness if other than
standard 13".
4. Finish, see chart 2, page 21.
5. Handing, LHR or RHR. Required on
"SS" or "L" function, only. See
chart 3, page 21.











Standard Trims Key retracts Key locks Pull when Exit only Key locks knob Key locks lever
latch bolt thumbpiece dogged





















Projection 2" 2" 2 3" 2

ANSI Function 03 05 02 01 08 08

Cylinder Type 11/4" Mortise 11/4" Mortise 11/4" Mortise 11/4" Mortise

Sex Bolt Requirements #425 2 2 2 2 2 2


Optional Trims Key retracts Key locks Pull when Key retracts Key locks Pull when
latch bolt thumbpiece dogged latch bolt thumbpiece dogged












Product Description 9975NL x 696NL 9975TP x 696TP' 9975DTx696DT 9975NL x 697NL 9975TP x 697TP1 9975DTx697DT

Trim Description 696NL-M 696TP-M 696DT 697NL-M 697TP-M 697DT

Escutcheon Plate Size 1%"x131/2"x3/16" 1%"x131/2"3/16" 1%"x131/2"x3/" 1%"x131/2"x3/6" 1%"x131/2"x3/16" 1%"x131/2"x3/6"

Grip Mounting Center 512" 51/2" 512" 51/2" 51/2" 51/2"

Projection 2" 2" 2" 3" 3" 3"

ANSI Function 03 05 02 03 05 02

Cylinder Type 11/4" Mortise 11/4" Mortise 11" Mortise 11/4" Mortise -

Sex Bolt Requirements #425 2 2 2 2 2 2
'If no cylinder operation is required. sDecifv "BE" 3Matchino dummv trim available, order 991KDT. 5Matching dummy trim available, order 992LDT.


blank escutcheon; example, 9975TP-BE.
2Available without escutcheon plate, order
9975EO (six sex bolts are required when
applicable).


4Night latch function available, order 991K-rigid.


6Night latch function available, order 992L-rigid.











rfa [1Mounted

Vertica Rod Dev ce
,aS- ..-. l;. U Sa"t. ar

w


1


Jul


R~-,. -N11 3IIILF


9927 surface mounted vertical rod
device for all types of single or
double doors, UL listed for accident
hazard installations. Covers stock
hollow metal doors with 86 or 161
cutouts.

Features:
* Nonhanded
* Field sizeable
* .' throw, latch bolt
* Latch bolt deadlocking
* Six popular finishes
* Hex key dogging

Dimensions
Touchbar height to 39%"
finished floor at center
Touchbar projection-
neutral 3/16e"
depressed 31/16"
Center case 8" x 2/4" x 2%"
Device length-Short 3' 2'6" to 3'
door size
Long 4' 3'1" to 4'
door size
Top & bottom latch case 41" x 211" x 11/2"
1/2" square
Vertical rod tubing


Strike
Device is furnished with standard
248L, 299 and 304L strikes. For
strike applications, dimensions and
minimum door stile information refer
to chart 1, page 20.
Device Options
CD9927 Cylinder dogging, page 24
EL9927 Electric latch retraction.
page 22
SS9927 Signal switch, page 22
330 Dummy push bar, page 24
To order, specify:
1. Product description number from
opposite page.
2. Size 3' (for door sizes 2'6" to 3') or
4' (for door sizes 3'1" to 4').
3. Door height if greater than 7'.
Extension rods will be furnished.
4. Door thickness if other than
standard 13/4".
5. Finish, see chart 2 page 21.
6. Handing, LHR or RHR. Required on
"SS" or "L" function, only. See
chart 3 page 21.
Pullman latch bolts are optional.
Latch bolts remain extended at all
times. Specify "Pullman Latch"
when required.












Standard Trims Key locks Pull when Exit only Key locks knob Key locks lever Key locks
thumbpiece dogged thumbturn
(Use with DT trim)









Product Description 9927TP' 9927DT 9927E0 x 990E02 9927K"' 9927L',4 9927TL15,6

Trim Description 990TP-V 990DT 990E0 991 K-V 992L-V 374T x 990DT

Escutcheon Plate Size 3" x 143e" x /32" 3" x 14" x 3/32" 3" x143/" 3/32" 2%" x 10%" x 34" 2%" x 10%" x3/4" 13/4" x 71/2" 7/8

Grip Mounting Center 51/2" 51/" 41/2" -

Projection 2" 2" 33/4 2/4" 13/4

ANSI Function 05 02 01 08 08 11

Cylinder Type Rim Rim Rim 11/4" Mortise

Sex Bolt Requirements #425 2 2 2 2 2 2

Optional Trims Key locks Pull when Key locks Pull when Key locks
thumbpiece dogged thumbpiece dogged thumbturn
S1(Use with DT trim)









Product Description 9927TP x 696TP' 9927DT x 696DT 9927TP x 697TP' 9927DT x 697DT 92 x 69 DT'

374T x 696DT or
Trim Description 696TP-V 696DT 697TP-V 697DT 374T x 697DT

Escutcheon Plate Size 1%"x 131/2"x36" 1%"x13/2"x13A6" 1%"x131/2"x3/16" 1%"x131"x316" 13/4"x 71/2" x"

Grip Mounting Center 51/2" 51/2" 51/2" 51/2" -

Projection 2" 2" 3" 3" 13"

ANSI Function 05 02 05 02 11

Cylinder Type Rim Rim 11/4" Mortise

Sex Bolt Requirements #425 2 2 2 2 2


Sex bolts tour sex bolts are included tor top
and bottom latch cases, the quantity indicated is
for the additional requirement.
'If no cylinder operation is required, specify "BE"
blank escutcheon; example, 9927TP-BE.
2Available without escutcheon plate, order


299 7EO (six sex bolts are requi ed when The 374-T control is shipped with TL cylinder
applicable). plate installed. An NL cylinder plate is furnished


trim. doors.








A .*- w.' ,


9947 concealed vertical rod device Strike
for use on single or double metal Device is furnished with standard
doors, UL listed for accident hazard 338 and 385 A. For strike
installations. Covers stock hollow applications, dimensions and
metal doors with 86 or 161 cutouts. minimum door stile information refer
to chart 1, page 20.


Features:
* Nonhanded
* Field sizeable
* Adjustable top rod
S%/8" throw, latch bolt
* Latch bolt deadlocking
* Six popular finishes
* Hex key dogging


Dimensions
Touchbar height to 39%"
finished floor at center
Touchbar projection-
neutral 313/4"
depressed 31/6"
Center case 8" x 2/4" x 23%"
Device length-Short 3' 2'6" to 3'
door size
Long 4' 3'1" to 4'
door size
Two piece
adjustable
Vertical rods-round top rod


Device Options
CD9947 Cylinder dogging, page 24
EL9947 Electric latch retraction,
page 22
SS9947 Signal switch, page 22
330 Dummy push bar, page 24
To order, specify:
1. Product description number from
opposite page.
2. Size 3' (for door sizes 2'6" to 3') or
4' (for door sizes 3'1" to 4').
3. Door height if other than 6'8" thru
8'0".
4. Door thickness if other than
standard 1%".
5. Finish, see chart 2 page 21.
6. Handing, LHR or RHR. Required on
"SS" or "L" function, only. See
chart 3, page 21.


(I-Im PIZ? SU M, tH 'L"Z.Z- I
_X --











0


Standard Trims Key locks Pull when Exit only Key locks knob Key locks lever Key locks
thumbplece dogged thumbturn
(Use with DT trim)






___ _, Z1_____I


Product Description 9947TP1 9947DT 9947E0 x 990E02 9947K1'3 9947L1'4 9947TL'.5

Trim Description 990TP-V 990DT 990E0 991K-V 992L-V 376T x 990DT

Escutcheon Plate Size 3" x 143/16" X 3/32" 3" x 143/16" X 3/32" 3" x 143/16" x %2" 2%" x 10%" x /4" 2%" x 10%" x 3/4" 13/" x 71/2" x 7/8"

Grip Mounting Center 51/2" 51/2" 41/2" -

Projection 2" 2" 33/4%" 23/4" 13/"

ANSI Function 05 02 01 08 08 11

Cylinder Type Rim Rim Rim 11/4" Mortise

Sex Bolt Requirements #425 2 2 2 2 2 2

Optional Trims Key locks Pull when Key locks Pull when Key locks
thumbpiece dogged thumbpiece dogged thumbturn
(Use with DT trim)








9947TL x 696DT or
Product Description 9947TP x 696TP' 9947DT x 696DT 9947TP x 697TP' 9947DT x 697DT 9947TL x 697DTII
376T x 696DT or
Trim Description 696TP-V 696DT 697TP-V 697DT 376T x 697DT

Escutcheon Plate Size 1%"x 132"x3/16" 1%"x/131/2"x6" 1%"x131/2"x3/16" 1%"x13/2"x3/16" 13/4" x71/2"x %"

Grip Mounting Center 52" 51" 51/2" 51/2" -

Projection 2" 2" 3" 3" 13/

ANSI Function 05 02 05 02 11

Cylinder Type Rim Rim 11" Mortise

Sex Bolt Requirements #425 2 2 2 2 2
'If no cylinder operation is required, specify "BE" 'Matching dummy trim available, order 991 KDT. 'The 376-T control is shipped with TL cylinder
blank escutcheon; example, 9947TP-BE. 4Matching dummy trim available, order 992LDT. plate installed. An NL cylinder plate is furnished
'Available without escutcheon plate, order if the NL function is required (operates only
9947EO (six sex bolts are required when when key is used).
applicable). 1


*





99-F fire exit rim device for all
types of 4' x 8' single doors or 8' x 8'
double doors with 9954 mullion, UL
listed for A, B, C, D or E fire labeled
installations.


Features:
* Nonhanded
* Field sizeable
S3/4" throw, latch bolt
* Latch bolt deadlocking
* Six popular finishes


Dimensions
Touchbar height to 3913/6"
finished floor at center
Touchbar projection-
neutral 313/16"
depressed 31/6"
Center case 8" x 21/4" x 23/4"
Device length-Short 3' 2'6" to 3'
door size
Long 4' 3'1" to 4'
door size


A


Strike
Device is furnished with standard
299-F strike in dull black finish
(optional finishes are available), for
single door applications. Optional
499-F strike is required on double
doors. For strike applications,
dimensions and minimum door stile
information refer to chart 1, page 20.
Device Options
99-F-2 Double cylinder, page 24
EL99-F Electric latch retraction,
page 22
SS99-F Signal switch, page 22
330 Dummy push bar, page 24
To order, specify:
1. Product description number from
opposite page.
2. Size 3' (for door sizes 2'6" to 3') or
4' (for door sizes 3'1" to 4').
3. Door thickness if other than
standard 13".
4. Finish, see chart 2, page 21.
5. Handing, LHR or RHR. Required on
99-2 "SS" or "L" function, only. See
chart 3, page 21.
6. 499-F strike for double door
applications.


A.-


1. 1 L











Standard Trims Key retracts latch Key locks Exit only Key retracts Key locks lever
bolt thumbplece latch bolt
(Pull required)










Product Description 99NL-F 99TP-F2 99EO-F 99NL-OP-PF 99L-F2.3

Trim Description 990NL-R 990TP-R 992L-R

Escutcheon Plate Size 3" x 14/16" x 3/32" 3" x 143A/6" X 3/2" -2 2%" x 10%" x "

Grip Mounting Center 51/2" 51/2" 41/2"

Projection 2" 2" 23/%"

ANSI Function 03 05 01 03 08

Cylinder Type Rim Rim Rim Rim

Sex Bolt Requirements #425 24 24 64 64 24

Optional Trims Key retracts latch Key locks Key retracts latch Key locks
bolt thumbpiece bolt thumbplece
Not recommended for use on ,
wood or composite fire doors.
Consult factory. i








Product Description 99NL-F x 696NL 99TP-F x 696TP2 99NL-F x 697NL 99TP-F x 697TP2

Trim Description 696NL-R 696TP-R 697NL-R 697TP-R

Escutcheon Plate Size 1%" x 131/2" x 3/6" 1%" x 13'/2" X 3/6" 1%" x 131/2" x 3/" 1%" x 13/2" x 3e"

Grip Mounting Center 51/2" 51/" 51/2" 51/2"

Projection 2" 2" 3" 3"

ANSI Function 03 05 03 05

Cylinder Type Rim Rim Rim Rim

Sex Bolt Requirements #425 24 24 24 24


'Specify WD (wood door) or MD (metal door). 3Night latch function available order 992L-R-rigid
21f no cylinder is required, specify BE (blank trim,
escutcheon), example 99TP-F-BE.


'Two additional sex bolts are required for double
door applications using 499-F strike. An
additional two are required on wood or
composite doors.


0












4Z JF
M"AU
A'


9975-F fire exit mortise lock device
for all types of 4' x 8' single or
8' x 8' double door installations, UL
listed for A, B, C, D or E fire labeled
installations. Fits door stiles as narrow
as 43/4"
The 7500 Mortise lock is equipped with
a 3/4" anti-friction latch bolt which is
field reversible without removing the
lock from the door. It has a
non-handled auxiliary bolt for
deadlocking, and a faceplate which
has an adjustable bevel. Field
selection of functions are furnished
standard. TP, K, or L function may be
field selected by removing a set screw.
Electric locking and unlocking, and
signal switch options are available,
refer to page 22.


Features:
* Nonhanded
* Full reversible mortise lock
* Field sizeable
* 3/4" throw, anti-friction latch bolt
* Latch bolt deadlocking
* Six popular finishes
Dimensions
Touchbar height to 39%"
finished floor at center
Latch bolt height to 40%/2"
finished floor at center
Touchbar projection-
neutral 3'3A6"
depressed 31/e"
Center case 8" x 2/4" x 23A"
Device length-Short 3' 2'6" to 3'
door size
Long 4' 3'1" to 4'
door size
Lock case 45/8"x53/4"x 11/ie
Faceplate 114"x8"x7/32"
Cylinder backset 23%"

Strike
Device is furnished with standard
575 strike in dull black finish,
optional finishes are available.
Specify when optional strike is


required. For strike dimensions refer
to page 20.
575 For use on 13/4" or 21/4" single
doors and 21/4" double doors
with coordinator.
575-2 For use on 13/4" double door
with coordinator.
576A Open back strike for 1%"
double doors without
coordinators.
576B Open back strike for 21/4"
double doors without
coordinator.
Device Options
EL9975-F Electric latch retraction,
page 22
SS9975-F Signal switch, page 22
E9975-F Electric mortise lock, page 22
330 Dummy push bar, page 24
To order, specify:
1. Product description number from
opposite page.
2. Size 3' (for door sizes 2'6" to 3') or
4' (for door sizes 3'1" to 4').
3. Door thickness if other than
standard 13".
4. Finish, see chart 2, page 21.
5. Handing, LHR or RHR. Required on
"SS" or "L" function, only. See
chart 3, page 21.












Standard Trims Key retracts latch Key locks Exit only Key locks knob Key locks lever
bolt thumbpiece











Product Description 9975NL-F 9975TP-P 9975EO-F 9975K-F'2 9975L-F'3

Trim Description 990NL-M 990TP-M 991 K-M 992L-M

Escutcheon Plate Size 3" x 146" x3/32" 3" x 14/6" x2" 2%" x 10%" x 3/4" 2%" x 10%" x 3/4%"

Grip Mounting Center 51/2" 51/2" 41/2"

Projection 2" 2" 33" 23/4"

ANSI Function 03 05 01 08 08

Cylinder Type 11/4" Mortise 11/4" Mortise 11/4" Mortise 11/" Mortise

Sex Bolt Requirements #425 2 2 6 2 2


Optional Trims Key retracts latch Key locks Key retracts latch Key locks
bolt thumbplece bolt thumbplece












Product Description 9975NL-F x 696NL 9975TP-F x 696TP1 9975NL-F x 697NL 9975TP-F x 697TP1

Trim Description 696NL-M 696TP-M 697NL-M 697TP-M

Escutcheon Plate Size 1" x 131/2" x 3/16" 1%" x131/2" x 3/16" 1%" x 131/2" x 3/16" 1%" x 131/2" x 3/16"

Grip Mounting Center 51/2" 512" 51/2" 51/2"

Projection 2" 2" 3" 3"

ANSI Function 03 05 03 05

Cylinder Type 11/4" Mortise 11/" Mortise 11/" Mortise 11/4" Mortise

Sex Bolt Requirements #425 2 2 2 2


If no cylinder operation is required, specify "BE"
blank escutcheon; example, 9975TP-F-BE.


2Night latch function available, order
991 K-M-rigid.


3Night latch function available, order
992L-M-rigid.












~1L
~ '1I ~ -T
JI I ~ I 1 iI '


9927-F fire exit surface mounted
vertical rod device for all types of
8' x 8' double doors, UL listed for
use on A, B, C, D or E fire labeled
installations.

Features:
* Nonhanded
* Field sizeable
* %" throw, anti-friction latch bolt
* Latch bolt deadlocking
* Six popular finishes

Dimensions
Touchbar height to 39%"
finished floor at center
Touchbar projection-
neutral 313/6"
depressed 31a6"
Center case 8" x 21/4" x 23/4"
Device length-Short 3' 2'6" to 3'
door size
Long 4' 3'1" to 4'
door size
Top & bottom latch case 41/2" x 21/8 x 11/2
1/2" square
Vertical rod tubing


Strike
Device is furnished with standard
304L and 299F strikes. For strike
applications, dimensions and
minimum door stile information refer
to chart 1, page 20.

Device Options
EL9927-F Electric latch retraction,
page 22
SS9927-F Signal switch, page 22
330 Dummy push bar, page 24

To order, specify:
1. Product description number from
opposite page.
2. Size 3' (for door sizes 2'6" to 3') or
4' (for door sizes 3'1" to 4').
3. Door height if greater than 7'.
Extension rods will be furnished.
4. Door thickness if other than
standard 1%".
5. Finish, see chart 2, page 21.
6. Handing, LHR or RHR. Required on
"SS" or "L" function, only. See
chart 3, page 21.










Standard Trims


I r 9 I I


Key locks
thumbpiece


Exit only


Key locks knob


Key locks lever


Key locks
thumbturn
(Use with DT trim)





I


Product Description 9927TP-F' 9927EO-F 9927K-F' 9927L-F' 9927TL-F1'2'3

Trim Description 990TP-V 991 K-V 992L-V 374T x 990DT

Escutcheon Plate Size 3" x 143/16" x /32" 2%" x 10%" x " 2%" x 10%" x /4" 13/4" x 71/2" x 7/8"

Grip Mounting Center 51/2" 41/2" -

Projection 2" 3/4" 2" 13/

ANSI Function 05 01 08 08 11

Cylinder Type Rim Rim Rim 11/4" Mortise

Sex Bolt Requirements #425 2 6 2 2 2

Optional Trims Key locks thumbpiece Key locks thumbpiece Key locks thumbturn
(Use with DT trim)




9927TL-F x96T6D I




Product Description 9927TP-F x 696TP7 9927TP-F x 697TP1 999DT2F 36D
374T x 696DT or
Trim Description 696TP-V 697TP-V 374T x 697DT

Escutcheon Plate Size 15" x 131/2" x 3/" 1%" x 131/2" x /16" 13/4" x 71/2" x 7/8"

Grip Mounting Center 51/2" 51/2" -

Projection 2" 3" 13/4"

ANSI Function 05 05 11

Cylinder Type Rim Rim 11/4" Mortise

Sex Bolt Requirements #425 2 2 2


Sex bolts four sex bolts are included for top 'If no cylinder operation is required, specify "BE"
and bottom latch cases, the quantity indicated is blank escutcheon; example, 9927L-F-BE.
for the additional requirement. 2The 374-T control is shipped with TL cylinder
plate installed. An NL cylinder plate is furnished


if the NL function is required (operates only
when key is used).
3Specify 10OWDA cover plate when using on
wood doors.


6






OR-..

: ,*flV'r
K* 4 *


Fire Ext Concealed

Vertca Rod Device


9947-F fire exit concealed vertical
rod device for use on 8 x 8' double
metal doors. UL listed for A, B, C, D
or E fire labeled installations.

Features:
* Nonhanded
* Field sizeable
* Adjustable top rod
* %" throw, latch bolt
* Latch bolt deadlocking
* Six popular finishes

Dimensions
Touchbar height to 39%"
finished floor at center
Touchbar projection-
neutral 313/6"
depressed 3V16"
Center case 8" x 21" x 2%/4"
Device length-Short 3' 2'6" to 3'
door size
Long 4' 3'1" to 4'
door size
Two piece
adjustable
Vertical rods-round top rod


Strike
Device is furnished with standard
338 and 385A. For strike
applications, dimensions and
minimum door stile information refer
to chart 1, page 20.

Device Options
EL9947-F Electric latch retraction,
page 22
SS9947-F Signal switch, page 22
330 Dummy push bar, page 24

To order, specify:
1. Product description number from
opposite page.
2. Size 3' (for door sizes 2'6" to 3') or
4' (for door sizes 3'1" to 4').
3. Door height if other than 6'8" thru
8'0".
4. Door thickness if other than
standard 13".
5. Finish, see chart 2, page 21.
6. Handing, LHR or RHR. Required on
"SS" or "L" function, only. See
chart 3, page 21.


q












Standard Trims Key locks Exit only Key locks knob Key locks lever Key locks
thumbpiece thumbturn
(Use with DT trim)











Product Description 9947TP-F' 9947EO-F 9947K-F' 9947L-F' 9947TL-Fl'2

Trim Description 990TP-V 991 K-V 992L-V 376T x 990DT

Escutcheon Plate Size 3" x 14/16" x3/32" 2%" x 10%" x 3/4" 2%" x 10%" x3/4" 13/4" x 71/2" x 7/8"

Grip Mounting Center 51/2" 41/2" -

Projection 2" 33/4" 2" 13/4

ANSI Function 05 01 08 08 11

Cylinder Type Rim Rim Rim 11/4" Mortise

Sex Bolt Requirements 2 6 2 2 2

Optional Trims Keylocks Key locks Key locks
thumbpiece thumbpiece thumbturn
(Use with DT trim)











Product Description 9947TP-F x 696TP1 9947TP-F x 697TP1 9947TL-F x 696DT or
9947TL-F x 697DT1,2
376T x 696DT or
Trim Description 696TP-V 697TP-V 376T x 697DT

Escutcheon Plate Size 1%" x 131/2" x 3/16" 1/" x 131/2" x 3/6" 1/4" x 71/2" x 7/"

Grip Mounting Center 51/2" 51/2" -

Projection 2" 3" 1/4

ANSI Function 05 05 11

Cylinder Type Rim Rim 11/4" Mortise

Sex Bolt Requirements #425 2 2 2


1If no cylinder operation is required, specify "BE"
blank escutcheon; Example: 9947TP-F-BE.


2The 376T control is shipped with TL cylinder
plate installed. An NL cylinder plate is furnished
if the NL function is required (operates only
when key is used).










Additional Information


1, 1- ,uo,,'e application/minimum stile

Device Standard Optional
Type Single door Double door Single Double door
Strike Stile Strike w/Mullion Stile Strike Stile Strike w/Mullion Stile
x 990 x 696/697 x 990 x 696/697 x 990 x 696/697 x 990 x 696/697
1409 313/16e" 313Ae" 299x5254/5645 47/16" 4%"
99 299 41/2" 4%" 299 x4954 47/8" 43/4" 1410 31%3/s" 313/As" 1408x5554/5754 313/16" 313/6"
1606 41/6" 315/16" 1606x1654 47/16" 414"
99-F 299F 41/2" 43/8" 499F x 9954 47/8" 43/4" -
Strike Stile Strike Stile Strike
575-2
9975 575 4%" 576A-576B 4"

9975-F 575 4%" -2 4%"
576A-576B
Strike Application Stile Strike Application Stile
x990 x 696/697 x990 x 696/697
9927 299 (Top) 260U (Top)
Latch Retraction 304L/248L-4 (Bottom) 385A (Bottom)
Single door 316" 3%" Single door 316" 3%"
PL9927 299 (Top) 260U (Top)
Pullman Latch 304L/248L-4 (Bottom) Two Vertical Two Vertical
9927-F 299F (Top) Rod Devices 3'11/" 3%" Rod Devices 311/" 3%"
304L (Bottom) Vertical Rod 385A (Bottom) Vertical Rod
338 (Top) w/Mortise w/Mortise
9947 385A (Bottom) Lock Device 4%" 4%" 304L (Bottom) Lock Device 43/4" 4%"

9947-F5A 338 (Bottom) Double 41" 41/8" 304L (Bottom)
385A (Bottom)I I III I


0










continued


0


J A-Lock stile cover

B-Touch bar


end cap


C-Touch bar


rzi2


I .~ ~-, A


D-Mechanism housing


E-Mechanism end cap


Chart 2-Finishes
Color US Number BHMA Number A, B, E C D
Brass, Polished US3 BHMA605 Plated Brass, Polished US3, BHMA605 Buffed Anodized
Bronze, Dull US10* BHMA612* Plated Bronze, Dull US10, BHMA612 Anodized
Chrome, Polished US26 BHMA625 Plated Stainless Steel, Polished US32, BHMA629 Buffed Anodized
Chrome, Dull US26D BHMA626 Plated Stainless Steel, Satin US32D, BHMA630 Anodized
Aluminum, Anodized US28 BHMA628 Painted Stainless Steel, Satin US32D, BHMA630 Anodized
Duranodic Dark Bronze 313 Painted Leather grain vinyl Anodized
*US10 (BHMA612 color may differ by Hardware Manufacturer), consult factory.
Touch Bar Options- Knurled Black vinyl Walnut grain vinyl Embossed "Push", bronze or stainless steel


Chart 3-Handing of Doors


LHR
(Left hand reverse)


RHR
(Right hand reverse)


Outside


Chart 4- ANSI Grade, Type & F-unctiun
Function Grade 1 Grade 1 Grade 1 Grade 1
ncion ype Type 2 Type 3 Type 8

01 99E0, 99EO-F 9927E0, 9927EO-F 9975EO,9975EO-F 9947EO,9947EO-F
02 99DT 9927DT 9975DT 9947DT
03 99NL, 99NL-F 9975NL, 9975NL-F -
05 99TP, 99TP-F 9927TP, 9927TP-F 9975TP, 9975TP-F 9947TP, 9947TP-F
07 99TP-2. -
08 99L, 99L-F 9927K, 9927K-F 9975K, 9975K-F 9947K, 9947K-F
9927L, 9927L-F 9975L, 9975L-F 9947L, 9947L-F
11-12 9927TL, 9927TL-F 9947TL, 9947TL-F


Chart 5-Fire Label Ratings/Applications
Application
Device-UL listed for Double door Double door
A, B, C, D & E labeled 8' x 8' 8' x 8' Double door
installations Single door with 9954 without mullion 8' x 8'
4' x8' mullion same direction double egress
99-F X X
9927-F X X
9947-F X X
9975-F X X*
*Use in combination with 9927-F or 9947-F.


i


!






,- ' . .. .!/ .." .-- ---e ._. .














The E9975 electric mortise lock device
has all the versatility and advantages
of the 9975 mortise lock device, plus
the advantage of being electrically
controllable by a remote switching
device, an access control or automatic
fire alarm system. The E9975 features
the E7500 mortise lock. The E-7500
controls the locking of the outside
trim. When unlocked, the door remains
latched, preserving the fire rating of the
door and making it particularly useful
where codes permit locking, but require
unlocking during a fire emergency.
Standard Features:
* Field reversible
* 24 VDC continuous duty solenoid
* Tamper resistant
* Silent operation
* Corrosion resistant
* Signalling functions
Optional Features:
* Fail safe (locked when energized,
unlocked when de-energized or
during power failure specify with
suffix "FS")
* Fail secure (unlocked when
energized specify with suffix
"FSE") Outside trim automatically
relocks, unless held unlocked
electrically.
* 24 VAC (by adding SO option)
* 12 VDC or 12 VAC (with SO option).
Note: Some Fire codes will require
"Fail Safe" (FS) operation for stairwell
doors. Be sure to specify the correct
operation for your application.
To order, specify:
1 a. E9975 or E9975F
lb. E-7500 (lock only)
2. When used on wood door, specify,
WDC (a special plate is required
for door edge). Door manufacturer
should be consulted for product
compatibility.
3. Specify FS or FSE.
4. Voltage


.'I .~.... ..t


Electric ;:',-:.;, .,: -EL




The EL feature provides remote
unlocking ability to exit devices.
A control station operator can flip a
switch to retract the latch bolt and
immediately change an exit only or
latched door to push-pull operation.
A powerful, continuous duty solenoid
retracts the latch bolt . for
momentary unlocking, or for extended
periods of time, in lieu of manual
dogging.
EL devices are also useful with
automatic door operators, and may be
applied to fire-rated devices when
under the control of an automatic fire
alarm system.
This feature does not include the
power transfer from door to frame, nor
the power supply or control operator.
(Refer to page 23 for the EPT-218
power transfer, and to page 23 for the
MPB-840 series power boosters).
Solenoid Specifications
Continuous Duty ........ 24 VDC
Current Inrush............. 16 Amps.
Current Holding
(300 milliamps) .......... 0.3 Amps.
To order, specify:
1. Use prefix EL, example EL99NL.


. f{= ,* -' sJl S. Lj : '*




The SS feature is used to signal the
unauthorized use of an opening.
These devices are equipped with two
internal SPDT switches. One switch
monitors both the touch bar and the
latch bolt assembly, making the latch
bolt tamper resistant, for positive
security. An additional SPDT switch is
connected to the 11/4" mortise cylinder
(cylinder not furnished) for alarm
"Bypass."
The device can be connected to a
security console, or may be used as a
single door alarm, when used with a
horn and power supply. A continuous
current electric transfer must be used
for transferring power from the frame
to the door.
SS9975 mortise lock device is
furnished with both signal switch
device and SS7500 mortise lock.
The SS7500 mortise lock has the
versatility and advantages of the 7500
lock with the addition of signalling
functions to monitor latch bolt
operation and the trim locking function.
This lock will normally be used with the
SS9975 mortise lock device, which
monitors egress. Other combinations
are available, consult factory.
Electrical Ratings:
Each switch rated 0.5 Amp. 24 VDC.
To order, specify:
1. Use prefix SS, example SS99NL.
2. Finish, see chart 2, page 21. (touch
pad finish is US32D, only).
3. Handling LHR or RHR.
4. Size 3' or 4'.


For typical electronic
applications see page 27











. continued


99ALK Exit Alarm Kit


The 99ALK exit alarm kit is a simple
yet effective way to monitor the use of
an exit. While still a means of egress,
the unit contains an internal horn and a
LED indicator. When the touchbar is
depressed, the horn sounds and the
LED lights, thus providing both an
audible and a visual means of
signaling that the opening has been
violated.
The cylinder/key switch serves three
functions:
* Silences the alarm.
* Provides a 20-second delay in the
alarm activation, allowing authorized
personnel to use the exit.
* Deactivates the alarm, allowing free
use of the opening.
The key switch uses a standard 11/4"
mortise cylinder. The unit operates on
two standard 9-volt transistor batteries.
When batteries are weak the horn will
emit an intermittent signal.
The 99ALK kit also includes
"EMERGENCY EXIT ONLY, ALARM
WILL SOUND" decal for application on
door.
Due to the special ALK dogging cover,
the dogging feature and other electric
options are not available.
Not recommended for use on 9927
or 9927-F, consult factory.
Minimum Door Sizes
Device 3' Length 4' Length
99/99-F 2'9" 3'3"
9975/9975F 2'9" 3'3"
9927/9927F 2'8" 3'2"
9947/9947F 2'8" 3'2"

To order, specify:
1. 99ALK
2. Finish, see chart 2, page 21.


Electrical Power Transfer


Mini-Power Boosters






--"lo
The 840 Series Mini-Power Boosters
are UL approved power supplies
specifically designed to handle exit
devices equipped with the EL (electric
latch retraction) feature.
Three different models are
available:
MPB-840-The MPB-840 is a 24 VDC,
2 Amp. unregulated power supply, 120
VAC input (MPB-840 does not contain
electronic switching). Not for use with
"EL' device.
MPB-841-The MPB-841 is a 24 VDC,
2 Amp. unregulated power supply, 120
VAC input, model with two switched
outputs, each controlled by its own
input.
MPB-842-The MPB-842 is a 24 VDC,
2 Amp. unregulated power supply, 120
VAC input, model with two switched
outputs, both controlled by one input.
Specifications:
Housing: Surface Mount, No Lock
81/4" x 61/" x 41/4"
(211mm x 166mm x 109mm)
Outputs: 0.5 Amperes Continuous @
24 VDC (each)
16.0 Amperes Surge For
300m Sec.
Inputs 1.8-2.2m Amp. Per Applied Volt
(control) Less Than 7 VDC Applied -
door locked (FSE)
More Than 10 VDC Applied
(30 VDC maximum) -
door unlocked (FSE)
Inputs 120 VAC-102-132 VAC @ 1 Amp.
(Primary): 240 VAC-204-264 VAC @ 1/2 Amp.

To order, specify:
1. Model number, example MPB-841.


The EPT-218 provides a means to
transfer power from the frame to the
door stile in EL99 Series applications.
It is used in installations with
41/2" x 41/2" butt hinges. The EPT-218 is
reversible. It allows a full (180)
rotation. When the door is closed, the
unit is concealed and tamper resistant.
UL Fire Listed for use with listed rim,
mortise and vertical rod fire devices
with electric latch retraction feature.
Dimensions
Housing 9" x 1716" X 11/2"
22.9 x 3.7x3.8 cm
Conductors Two 18 AWG. UL Approved
Rating 10 Amps. at 24 VDC
(Class 1 low voltage)
(20 Amp. maximum surge)

To order, specify:
1. Number EPT-218.
2. Finish, SP28 (sprayed aluminum) or
SP313 (sprayed duranodic).











Optn and Accessories


Double cylinder 99-2, features an
inside key cylinder which locks or
unlocks the outside trim and an outside
key cylinder which retracts the latch
bolt, only.
Unit requires two rim type cylinders,
part number 3216.
Double cylinder is a Rim Device option
only, available trims are: 990TP,
992L, 696TP or 697TP.
To order, specify:
1. Use suffix -2 with device/trim
number, example 99TP-2.
2. Specify handing, LHR or RHR, see
chart 3 page 21.


Cylinder Dogging-CD





Cylinder dogging is available on all 99
devices to replace the standard hex key
dogging. Unit requires a standard 1 V4"
mortise cylinder.
To order, specify:
1. Use prefix CD, example CD99NL.

Cylinder Dogging Kit CDK
For field conversions, a cylinder
dogging conversion kit is available.
Order 99CDK, specify finish.

Hex Key Dogging Kit HDK
For field conversion, a hex key
dogging conversion kit is available.
Order 99HDK, specify finish.


z, ; 7 ri d re' ' 9 9 2


Optional Levers
17


Dummy Cylinder-3218


3&, Dummy Push Bar




The 330 dummy push bar is designed
as a companion unit for all 99 devices.
The touch bar is rigid or nonfunctioning.
A push/pull operation can be
accomplished by using 990DT, 696DT
or 697DT trim.
To order, specify:
1. 330.
2. Size 3' or 4'.
3. Finish, see chart 2 page 21.


Option lever design is available, similar
to the Schlage #17 (01).
To order specify:
1. Use suffix x17, example 99Lx17.


Option lever design is available, similar
to the Schlage #20 (03).
To order specify:
1. Use suffix x20, example 9927Lx20.


Glass bead kit
Glass bead conversion kits are
available for all 99 Series devices for
use on doors with raised glass beads.
Each kit consists of 1/8" shim sets.
Two kits are required for 1/4"
clearances.
To order specify:
1. 99GBK
2. Indicate device type.


65


Cylinders
Cylinders are not furnished with
devices or trim and must be specified
when ordering.
Rim Cylinder-3216





Regularly furnished with 21/4" flat
horizontal tailpiece, 21/2" anchor
screws, anchor plate and ring.

Mortise Cylinder-3215







Length (under shoulder
including cam) 1 4".











* Nomenclature


EL 99 27 TP -F -BE


CD -Cylinder Dogging
E -Electric Locking
EL -Electric Latch Retraction
PL -Pullman Latch
SS -Signal Switch

99 -Series

None -Rim Device
27 -Surface Mounted Vertical Rod Device
47 -Concealed Vertical Rod Device
75 -Mortise Lock Device

DT -Dummy Trim
EO -Exit Only
K -Knob
L -Lever
NL -Night Latch
NL-OP -Night Latch Cylinder Assembly
* TL -Turn Lever
TP -Thumbpiece

F -Fire Exit Device

BE -Blank Escutcheon
2 -Double Cylinder













Popular Double

Door Applications


Mortise lock and surface mounted vertical rod device
combination-same direction
,___________," . r '*------


Two rim devices with mullion-same direction


Two vertical rods-double egress


Two surface mounted vertical rod devices-
same direction (do not use with overlapping astragal)


I'
II
II
II
II



I i




*i

!,;

II
II
II



II
I'
I'
II












* Electronic Applications



Mini-Power *
Booster flJ
MPB841



EL-Electric Latch Retraction
This system provides both monitoring
of the door security as well as remote
latch retraction for push-pull operation.


Horn I
L1900F

SS-Signal Switch
Unauthorized use of this opening will
activate the local horn. The key switch
permits inhibiting this system for
authorized entry.


E9975-Electric Mortise Lock
Device
Adaptable for openings where
continuous latching is required while
the trim may be electrically locked or
unlocked from a remote location -
stairwells, exterior doors, etc.


Monitor
Strike
4263-T3


Mini-Power
Booster
MPB-840







0




























VON DUPRIN
Part of worldwide Ingersoll-Rand
Printed U.S.A.


99/6810/15




University of Florida Home Page
© 2004 - 2010 University of Florida George A. Smathers Libraries.
All rights reserved.

Acceptable Use, Copyright, and Disclaimer Statement
Last updated October 10, 2010 - - mvs