CopiBook ManualFollow these steps for correct use of the CopiBookVersion: Special Collections 10-22-08
2 Turn on side lights so they can start to warm up. Turn on external monitor.
3 Turn CopiBook on by depressing the round Start button on the back of the machine. Note: If after a couple of seconds nothing happens, you will need to make sure that the Power Supply switch is on, in the down position. 2ndNote: It takes several minutes for the CopiBook to boot up. Be patient. When the Language Selection screen is displayed, you are ready to start. Choose the icon that depicts the American and British flags.
4 Single click on the Use this one. Then click on the Administration Icon in top right corner. Click on the Destinations tab. Click on WSID10012. click on green checkmark. Then click on the Scanner icon to exit to main scanning screen.
5 Click on the Settings icon. Click on the Save tab. Click on processed Image icon.
6 The destination should be set to WSID10012. Format should be set to TIFF. You should type the name of the folder you would like your images saved to in the Subdirectory box. Under Auto File Names, type what you want the prefix of your image name to be in the space furthest to the left. Type the number you would like to start with in the center space Click the green check mark when finished. Be sure that theres a checkmark to the left of processed image. Check the Processing tab. We only use the Detail Enhancement.
7 Click on the Format tab. The Document Type section should be set to the rectangle that is totally shaded with the number 1 on it for single image scans. The shaded rectangle with the numbers 1 and 2 are used for double image scan as in the inside portion of books. This is also where you choose the Color Space, it should never be set to anything other than Color or Grayscale. (The first two choices) Format should be set to Auto. Resolution to 300 ppi. Click on the green checkmark to return to main Scanning screen.
8 When you shut glass with the power on, it should latch in the down position. To unlatch the glass push the Glass Release button. If you will be shooting the inside pages of a book, open it to roughly the middle and place it on the book cradle. If you are shooting a flat item, use the foam spacer pad if the item you are scanning doesnt touch the bottom of the glass with the cradle adjusted all the way up. Close Glass. Use the Up and Down arrow buttons to adjust the cradle so that the item is snug against the bottom of the glass.
9 Click on Automatic Focus Adjustment button. Wait until CopiBook is no longer making any noise. Click on Green Check Mark to save and exit to main Scanning screen. Click on Adjustment icon. Click on the Balance/Focus tab. You should now be ready to start shooting your item.